말랑말랑한 블로그

두뇌가 말랑말랑해지는 블로그

RPG 만들기 2000/2003 루프 미디 제작하기

댓글 3

업무영역/습득한 경험

2014. 9. 4.



http://www.anvilstudio.com/


여차저차 검색하다가 RPG200X용 루프 미디를 만드는 법을 찾아냈습니다.

이게 무슨말이냐 하면은..


제가 작곡한 음악들도 보면 전주 부분이 있고, 반복 부분이 있습니다.

예를들어 더 도리토스에 삽입된 darksidecalchi.mid를 설명드리자면, 그냥 틀면 "틱틱틱틱두구두구둥" 하고나서 본격적인 음악이 시작됩니다.


[<전주><반복>][<전주><반복>]...


그런데 이 프로그램을 가지고 조작을 해주면, 음악이 다 끝나서 다시 처음부터 전주 부분이 튀어나오는게 아니라


[<전주><반복><반복><반복><반복>...]


형식으로 음악을 틀 수 있다는 사실.


그 뿐만이 아니라 "루프하지 않는 미디(sleep.mid 혹은 J전투종료3.mid 같은..)"도 제작이 가능합니다.


.

.

.


서론이 길었군요.


1. Anvil Studio 프로그램을 설치한다.

2. 미디 파일을 불러온다.

3. "반복"을 시작해야 할 부분(루프를 시작할 부분)을 클릭한다.

4. EDIT > Insert MIDI Event 클릭

5. Include all controller event 체크

6. Event : b06f 선택

7. 채널 1에 111값을 줍니다.

8. 저장하고 RPG2003에서 미디를 재생시켜봅니다. 전주를 빼고 루프되는걸 확인할 수 있습니다.



** 원문


This is for you all who are sick of your midi's looping back and playing the intro of your song over again, when you really want it to loop back to the first verse (or wherever). Here's how to do it: 


*** Steps to Making a Looping MIDI *** 

Step 1: Install Anvil Studio if you haven't done so already. 

Step 2: Save your MIDIs to the "Music" folder in your RM2K project. 

Step 3: Run Anvil Studio and search for your MIDI, and then open it. 

Step 4: Listen to your MIDI until you find a section that you want to repeat. When you reach the end of that section, or find that the section plays more than once, stop. 

Step 5: Select View -> Composer from the top toolbar, and scroll back to the first note in the section that you want to repeat (if you have a Final Fantasy battle MIDI, you'd want to start the loop after the first note of that ever-familiar intro). 

Step 6: once you've found your starting point, select Edit -> Insert MIDI Controller Event from the top toolbar. A list of events pops up, which will allow you to change the dynamics of your MIDI, such as pitch bending and channel volume. The looping event goes under the code number "b06f", which is not in this list. In order to make it appear, you'll have to check the box that says "Show all controller events". When you do this, the "Kind of event" box will expand its list to show events that don't have official names. Move down the list until you find "Event: b06f". Set the channel to 1, and set the Control value to 111. This will set the event in place. 

Step 7: Save your MIDI and listen to it thoroughly in RM2K. If you did the above steps correctly, you should hear your MIDI play, but instead of going back to the beginning of the song once it reaches the end, it should restart at the point where you inserted the MIDI. 

Step 8 (optional): If you listen to your MIDI and something doesn't sound right (such as notes not playing again after fading out at the end), delete ALL of the notes at the end of the song EXCEPT those that you want to keep in your loop. You may have to go through all of the channels in your song in order to get this step right. For added precision, go to the first point in the song where the loop starts again, and memorize its position in the song (it will be shown underneath "Time" near the top of the screen), and make sure to delete all notes that play after that time. Save your MIDI when you're finished. 

Step 9: VoilÅ•! You're finished! 



You can also use this MIDI controller to create songs that don't loop (such as short fanfares for victory, or when a person joins your party) by placing it at the end of the song. 



*** Steps to Making a Non-Looping MIDI *** 

Follow steps 1-3 for Looping MIDIs, and then do the following: 

Step 4: Select View -> Mixer from the top toolbar, and scroll all the way to the end of the song. 

Step 5: Select View -> Composer, and then Edit -> Insert MIDI Controller Event from the top toolbar. 

Step 6: Check the box that says "Show all controller events", change the "Kind of Event" to "Event: b06f", the channel to 1, and the Control Value to 111. 

Step 7: Save your MIDI and listen to it thoroughly in RM2K. If you did the above steps correctly, your MIDI should play all the way through, and stop once it hits the end. 

Step 8 (optional): If you listen to your MIDI and there are still short notes (or drumbeats) playing at the end, you probably didn't set the controller far enough to the end. Make sure that it is placed at the VERY end of the song before saving and playing it in RM2K. 

Step 9: VoilÅ•! You're finished! 


http://rpgmaker.net/articles/104/